![]() Step 8: Put your spout back onto its copper pipe.Step 7: Once it’s spotless, dry it with a clean rag and add some Teflon tape to the tip.Once a day, remove the spout and check it, using a rag or old toothbrush to scrape off loose dirt. Step 6: Put the spout inside your vinegar mixture and leave it for three to four days.It should be enough to completely cover your spout, right up to its base. Step 5: Fill a metal dish with vinegar and water.Apply the paste onto the dirty parts of the spout, let it sit for half an hour, then rinse it off. You can also scrape off the dirt using a paste of vinegar and baking soda. Step 4: Look inside the spout and use a rasp or sandpaper to scrape off any visible dirt or stains.If it’s a pop-on, use a screwdriver or palette knife to gently pry it off the wall.If it’s threaded, turn it anticlockwise until it comes off.If it’s a screw-on, remove the screw then pull out the spout.Step 3: Remove the spout according to its type:.A pop-in pipe that slides onto the wall and locks in place.A threaded pipe that screws onto the wall.Step 2: Inspect your spout to see how it’s attached to the wall. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |